Below Ground Waterproofing

bituBOND Peel & Stick

bituBOND® is a BRANZ Appraised self-adhesive membrane system, designed for protecting concrete foundations and vertical walls from aggressive soil attack, dampness and vapour transmission.

The bituBOND® system is used in low hydrostatic applications such as in shallow excavations or away from the water table. bituBOND® is an ideal membrane for damp-proofing foundations, walls, bridges, viaducts and tunnels. bituBOND® can be used on both concrete and polystyrene substrates and can be used under composite shingles and roof tiles.

bituFLAME FlameSEAL

bituFLAME is an APP-modified bitumen membrane reinforced with 180 gsm non-woven polyester fabric. bituFLAME has good flexibility at both high and low temperatures.

bituFLAME has many outstanding features, making it the ultimate choice when selecting a torch-on membrane. It's superior qualities of tensile strength, elongation and tear resistance sets bituFLAME apart as the ideal durable solution for your waterproofing requirements. A comparison of product data sheets shows bituFLAME to have the highest mechanical properties of any modified bitumen available.

rawMAT Bentonite

The rawMAT Pre-hydrated Bentonite system provides high level waterproofing protection to below ground structures in the most demanding situations.

The advantage of our pre-hydrated bentonite system is that the initial bentonite hydration occurs under factory controlled conditions. Unlike the dry bentonite systems, which are prone to shrinkage and cracking, the Rawmat Pre-hydrated bentonite is highly resistant to the effects of water contaminants. These contaminants induce cationic exchange in dry bentonite systems causing them to have a reduced swell, shrink and crack as the clay converts from sodium bentonite to the calcium form.